|
|
|
|
|
|
|
Do you want to be a better CNC'er in 37 Seconds? Get Better Tool Life, Surface Finish, and Material Removal Rates Fast. It's that easy. You can install and get results now. |
 |
Elmer Verburg's Reversible Vertical Twin Wobbler, Page 2 |
 |
Crank Bearings |
The crank bearings are made of brass, but are fairly simple in design:
Perspective View...
Front View. The mounting holes are 4-40...
Right View...
Okay, we need 2 of these little guys made from brass. A piece of brass plate in the neighborhood of 3/4" square by 5/16" or 1/2" thick should do nicely as a starting point. Alternatively, some 1" diameter round stock may also be used if you don't have any brass plate on hand (I didn't).
|
Column |
The column is the most complicated piece to machine because it has a number of features, holes, and curves:
Perspective View...
Front view...
Right view...
Top view...
|
Do you want to be a better CNC'er in 37 Seconds? Get Better Tool Life, Surface Finish, and Material Removal Rates Fast. It's that easy. You can install and get results now.
|
||||||||||||||||||
| ||||||||||||||||||
